How To Use A Sewer Jetter. A sewer jetter is an industrial piece of equipment that uses high pressure water to clean sewers, pipes, and other surfaces. When you use a properly sized sewer jetter:
Portable Sewer & Drain Line Cart Jetters Trailer Jetters, Sewer from www.hotjetusa.com
Into most drains up to 4” id. The next step is to attach the provided ball valve to the end of the pressure washer hose. The sewer jet is a long piece of flexible hose with a jet nozzle on one end.mar 8, 2021.
Put The Sewer Jetter Hose About A Foot Into The Drain.
On gas jetters, check engine fuel and oil levels. Sewer jetting is a valuable means of cleaning interior. How to use sewer jetter.
• A Residential Gas Pressure Washer Rated From 2.0 To 2.9 Gpm Can Usually Power The Jetter At
On gas jetters, check engine fuel and oil levels. • an electric pressure washer rated from 1.2 to 1.5 gpm can usually power the jetter between 20 and 50 ft. Into most drains up to 4” id.
Connect The Other End Of The Jumper Hose To The End Of The Jetter Hose.
Slowly move the hose down the drain while holding the spray wand handle. To begin, turn the water faucet on fully and purge air from the system. Sewer jetting is the application of directed high pressure water to remove clogs, dirt, grease, and/or grime from pipes to allow them to flow freely.
Then You Are Ready To Remove The Spray Gun From The Pressure Washer Hose, Replace The Spray Gun With The Ball Valve, And Fasten The Ball Valve To The Jumper Hose.
March 6, 2022 by sewersmart. Turn on your pressure washer. In order to convert your pressure washer into a sewer jetter, you simply connect the pressure washer hose to the pressure.
Imagine A Cross Between A Mini Fire Hose And A Pressure Washer And You’re Not Far Off The Mark!
The next step is to attach the jumper hose to. The next step is to attach the provided ball valve to the end of the pressure washer hose. Never point the end of the jet hose at a person.
Post a Comment for "How To Use A Sewer Jetter"